Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TO_Encoder filter input signal

Created by: gigi_plc at: 2/11/2020 2:04 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

2/11/2020 2:04 PM	Rate (0)
gigi_plc Bronze Member Joined: 12/14/2011 Last visit: 1/23/2023 Posts: 144 Rating: (11)	Hi to all, i have a flying saw (plc 1500T) with a TO_encoder in profinet that is the master. The signal (speed) from the encoder is not very stable (see the picture). This send the slave in error. It is possible to FILTER with some parameters the signal? Many thanks Attachment IMG-encoder.jpg (52 Downloads)

Suggestion To thank Quote Answer

2/12/2020 7:00 AM	Rate (0)
Mister T Silver Expert Joined: 4/28/2015 Last visit: 1/25/2023 Posts: 385 Rating: (49)	Hello, did you notice the following FAQ: SIMATIC S7-1500T: Guidelines for filtering and extrapolation with actual value coupling https://support.industry.siemens.com/cs/ww/en/view/109763337 For more information or application examples, please have a look to the topic site: SIMATIC Technology - Motion Control: Overview and Important Links https://support.industry.siemens.com/cs/ww/en/view/109751049
	Last edited by: Mister T at: 02/12/2020 07:00:45
Suggestion To thank Quote Answer

2/12/2020 9:29 AM	Rate (0)
gigi_plc Bronze Member Joined: 12/14/2011 Last visit: 1/23/2023 Posts: 144 Rating: (11)	Thank you for the answer. The second link doesn't work. I try to solve the problem with the encoder. Many thanks.

Suggestion To thank Quote Answer

2/12/2020 9:35 AM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 1/28/2023 Posts: 29042 Rating: (3557)	gigi_plc The second link doesn't work. The second link works by me. Try it again...

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on