Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

To move an object

Created by: ALSum at: 3/26/2008 4:03 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

3/26/2008 4:03 PM	Rate (0)
ALSum Posts: 8 Rating: (0)	Hello, I am new with WinCC and I wanted to ask howto movean objecthorizontalywith a value that I have givinin a DB station.See theprintscreen in the attachment formore details. Thanx... Attachment screenshot.JPG (36 Downloads)
ALSum Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

3/26/2008 4:48 PM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi perhaps this FAQ can give some help: http://support.automation.siemens.com/WW/view/en/12730269 nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

3/27/2008 10:45 AM	Rate (0)
ALSum Posts: 8 Rating: (0)	Hi, In the link that you gave me there is an explanation about a bar with it's value changed but in my case I have to send a Square from point A to point B. Is there a posibility that it can be done. Thanx, ALSum
ALSum Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

3/27/2008 12:22 PM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi at your square you have to change the value of the property "position", like in the FAQ. But perhaps the manual (chap 5) is helping you to see the diffent ways for dynamization. http://support.automation.siemens.com/WW/view/en/15342782 nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

4/1/2008 10:09 AM	Rate (0)
Natero Posts: 9 Rating: (1)	Hi there. I have done those mostly using Dynamic Dialog for Position X. Select Your tag and make calculation with it according Your screen resolution (eg. left =0 and right=1280 with 1280x1024 resolution). Example tag is Tag1. Value is changing between 0-500. Expression/Formula is'Tag1'/500*1280 Select Direct and Apply. Now if Tag1 value is 100,positionX gets value 256.Value 495 takes it near right edge of the screen.
Natero Posts: 9 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on