Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Too many tags

Created by: khue at: 9/17/2007 5:53 AM (5 Replies)

Rating (0)

Thanks 0

6 Entries

9/17/2007 5:53 AM	Rate (0)
khue Posts: 3 Rating: (0)	I have a project with PLC S7300 and Win CC. there're alot of tags in my project . I don 't want to update each tag because it take me much time . Can anyone show me how to update every tag at same time from the Symbol of PLC's adress ? Please give me some advice ! thank you very much
khue Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

9/18/2007 3:22 PM	Rate (0)
khue Posts: 3 Rating: (0)	Why don't anyone help me ???
khue Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

9/18/2007 4:26 PM	Rate (0)
Massimo Posts: 7 Rating: (1)	Sorry but I didn’t understand exactly what is your problem. Cam you add same explanation. Tank you.
Massimo Posts: 7 Rating: (1)
Suggestion To thank Quote Answer

9/23/2007 3:18 AM	Rate (0)
khue Posts: 3 Rating: (0)	Thank Massimo! I with a projecct with about 300 tags.This mean there are 300 addresses in PLC I need to update. It takes me much time. Because I need 300 times to do a same work. So I want to do this work more quickly.Arethere other ways to do that? or Are there any software link to Win CC to help Win CC understand the symbols from PLC's address ?
khue Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

9/23/2007 7:02 PM	Rate (0)
Nemo Posts: 3149 Rating: (171)	HI perhaps you can use the tools mentioned in this FAQ http://support.automation.siemens.com/WW/view/en/22016422 nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

10/11/2007 1:19 PM	Rate (0)
azrael Posts: 45 Rating: (4)	you can set the attribute 'S7_m_c' to 'true' and transfer using OS transfer.. also when uenable the S7 Symbol Server option of WinCC you can just select the tag from plc as if selecting it from your wincc tags.
azrael Posts: 45 Rating: (4)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on