Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

(Too) Wide parameter blocs to insert in display

Created by: flotul at: 7/7/2020 2:59 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

7/7/2020 2:59 PM	Rate (0)
flotul Regular Member Joined: 2/23/2017 Last visit: 5/24/2022 Posts: 32 Rating: (0)	Hi All, I often need to insert information in the LOGO's LCD. Unfortunately, the parameter blocs do have an important width even though I only need, i.e., to display 3 characters. Is there a way to reduce this "unused" (= in RED) width please?
	Last edited by: flotul at: 07/07/2020 15:02:58
Suggestion To thank Quote Answer

7/7/2020 3:03 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 5/28/2022 Posts: 26902 Rating: (3255)	No, there is no way. The width of the output fields cannot be changed.

Suggestion To thank Quote Answer

7/8/2020 7:29 AM	Rate (0)
flotul Regular Member Joined: 2/23/2017 Last visit: 5/24/2022 Posts: 32 Rating: (0)	Thank you.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on