Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Torque Measuring

Created by: CNC Chennai at: 3/19/2011 8:17 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

3/19/2011 8:17 AM	Rate (0)
CNC Chennai Experienced Member Joined: 12/5/2006 Last visit: 11/7/2022 Posts: 176 Rating: (2)	Hai All I want to measure the Actual Torque for an Axis in 840D, while machining . Please help me where I can monitor the Torque of an Axis. Is there any External software to measure it, Thanks

Suggestion To thank Quote Answer

3/19/2011 11:23 AM	Rate (0)
mehar Posts: 91 Rating: (1)	Hello Chennai CNC, You can find the Torque value at Drive md , parameter R31. or if you have stater software then check in Expert list.
mehar Posts: 91 Rating: (1)
Suggestion To thank Quote Answer

3/19/2011 12:43 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (473)	Hello,,, @ Chennai CNC is talking about 840D powerline. What you have talking about Solution line and starter.... There is a Difference..... Regards, Ekalavya
Ekalavya Posts: 2964 Rating: (473)
Suggestion To thank Quote Answer

3/19/2011 1:51 PM	Rate (0)
CNC Chennai Experienced Member Joined: 12/5/2006 Last visit: 11/7/2022 Posts: 176 Rating: (2)	Dear Ekalavya It is 840D Power Line.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on