Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TORQUE MOTOR PROBLEM

Created by: kambiz talaee at: 10/13/2010 10:52 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

10/13/2010 10:52 AM	Rate (0)
kambiz talaee Regular Member Joined: 10/12/2010 Last visit: 3/2/2024 Posts: 37 Rating: (0)	HI WE HAVE 840D SYSTEM AND HAVE A TORQUE MOTOR OF SIEMENS BUT NOW WE HAVE A FAULT NUMBER 300618 IS IT POSSIBLE TORQUE MOTOR WAS DESTEROYED? BESTREGARDS

Suggestion To thank Quote Answer

10/13/2010 11:11 AM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello..... It cannot be judged like that.....could you provide the error description details whatexactly your getting..... Regards, Ekalavya
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

10/13/2010 11:36 AM	Rate (0)
kambiz talaee Regular Member Joined: 10/12/2010 Last visit: 3/2/2024 Posts: 37 Rating: (0)	HI EXCUSE ME THE NUMBER FAULT IS 300610

Suggestion To thank Quote Answer

10/13/2010 11:44 AM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello... Could you check this points attached..... Regards, Ekalavya Attachment 300610.pdf (141 Downloads)
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

10/17/2010 3:30 PM	Rate (0)
Jason. Experienced Member Joined: 7/13/2008 Last visit: 9/20/2024 Posts: 107 Rating: (9)	sure, anything is possible. A failed rotor identification does not mean that the motor is broken, though. Did this work for a long time with no issue? I have never seen a torque motor fail due to anything other than contamination. Is the axis able to be turned without the motor? Does it feel proper? Can you attempt to restart from a different rotor position?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on