Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TP 1200 alarm buffer overflow indication

Created by: Rudrani at: 6/9/2013 1:18 PM (3 Replies)

Rating (0)

Thanks 2

4 Entries

6/9/2013 1:18 PM	Rate (0)
Rudrani Posts: 163 Rating: (4)	hi all, I have a TP 1200. I am using alarm buffer option.In the manual it is given that capacity of the alarm buffer is 1024. I want to give the indication of alarm buffer overflow on HMI. can anybody tell me how to do this?... pls help as soon as possible... Regards Rudrani
Rudrani Posts: 163 Rating: (4)
Suggestion To thank Quote Answer

6/10/2013 11:33 AM	Rate (0)
Rudrani Posts: 163 Rating: (4)	hi, pls reply...
Rudrani Posts: 163 Rating: (4)
Suggestion To thank Quote Answer

6/10/2013 12:15 PM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 12/20/2024 Posts: 8786 Rating: (1172)	Hello Rudrani, Please have a look at the following: Go to HMI (TP1200) -> Runtime settings -> Alarms There you will find "Buffer clearance in percent upon buffer overflow" and the option "Report" When "report" is selected, you will get a message upon buffer overflow. Best regards, Wizard

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Tomy Master Rudrani

6/11/2013 11:24 AM	Rate (0)
Rudrani Posts: 163 Rating: (4)	thank u wizard....
Rudrani Posts: 163 Rating: (4)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Adv Alarms Messages

Follow us on