Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TP 1200 COMFORT & TIA PORTAL v11 SP2 uPD5 - SOME PROBLEM

Created by: walter_g at: 5/17/2013 12:44 PM (2 Replies)

Rating (0)

Thanks 1

3 Entries

5/17/2013 12:44 PM	Rate (0)
walter_g Bronze Member Joined: 7/5/2006 Last visit: 1/24/2025 Posts: 180 Rating: (4)	Good morning, i have encountered some problem with panel TP1200 comfort and TIA Portal V11 SP2 update5. I describe some problems occurred and solved. A project without errors is downloaded into the panel: 1) the function applied at a button (recall a page) is not executed. When i press the button it's call the function "exit runtime". For solve this problem i had to move the button in another position on the page. (it's very very strange) 2) trend page with only one variable displayed. The value show on the trend is completely different (is how if the data type is exchanged). For solve this problem i have deleted the page and then remake with the same variables. 3) In the project there are 5 different trend page. After some modifications and after some download to the panel, and without errors during compiling phase, is not more possible download the project. Also if restart the PC and also if restart the panel. When you try to download the project the bargraph that appear on the PC screen (on the bottom right side) not arrive to 100% and the TIA Portal show a window that inform that is necessary close the application! For solve this BIGGER problem, i had to recall an old version of my application and rewrite all the modifications ! Suggest to Siemens developpers to put in the new version of TIA Portal the button "Delete all temporary files", like was present in the WIN CC FLEXIBLE. Maybe a lot of the problems that i have find in the last months will be cleared. Any comments will be appreciated.

Suggestion To thank Quote Answer

5/17/2013 1:26 PM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 1/24/2025 Posts: 8808 Rating: (1177)	Hello walter_g, In those cases, you should try to use the Compile -> All Software (rebuild All) Select the panel in project tree, use right mouse click -> Compile -> Software All (rebuild All) (Something like "delete temporary files" in WinCC flexible ) Best regards, Wizard

Suggestion To thank Quote Answer

5/17/2013 2:12 PM	Rate (0)
walter_g Bronze Member Joined: 7/5/2006 Last visit: 1/24/2025 Posts: 180 Rating: (4)	Great, thanks for your reply.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Wizard

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Installation Options General

Follow us on