Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TP177-A not booting

Created by: ashutosh pethkar at: 1/27/2011 8:03 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

1/27/2011 8:03 AM	Rate (0)
ashutosh pethkar Posts: 18 Rating: (0)	hi Everybody, TP177A is not booting. It is always show blue screen with "bootloader 1.8, 2006/11/10" written at left side of screen and that blue screen remains there for ever. 1. Now i tried to OSupdate with "Reset Factory Options" on ProSave/Wincc both but not able to communicate. 2. i tried serial/ppi cable setting also for this OSupdate with "reset..." but not able to connect. 3. a screen comes and keep on asking to boot the HMI...but nothing happens beyond that. please any body tell me how i can communicate with TP.
ashutosh pethkar Posts: 18 Rating: (0)
Suggestion To thank Quote Answer

1/27/2011 8:20 AM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 12/18/2022 Posts: 10221 Rating: (1175)	Hello, Seems you tried all possible ways like in my new TP177A is not booting. If those not help, I suggest you to contact with Siemens repair center. Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

1/27/2011 9:24 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 1/27/2023 Posts: 8584 Rating: (1122)	pethkarashu 3. a screen comes and keep on asking to boot the HMI...but nothing happens beyond that. Hi, At this point, you should turn of power of HMI. And after some seconds turn it on again. (Transfer of OS should start now) Best regards, Wizard

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on