Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TP177 Micro discrete alarm date / time / status display problem

Created by: CorbyLee at: 11/3/2008 3:38 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

11/3/2008 3:38 PM	Rate (0)
CorbyLee Posts: 11 Rating: (1)	Hi, Just commissioning my first dual language WinCC Flexible project and ran into problem. Hardware is a TP177 Microconnected to S7-226 CPU and the project has been configured using WinCC Flexible 2007 HF4 Compact version. Project was written with English (UK) as original language and then French (France) added as a second user selectable language. Problem is with the display of date, time andalarm statusin Alarm Window and Alarm View. When English is selected, the date, time and statusof the alarm is displayed correctly on first line of 2-line alarm display. However, when French is selected the first line of the alarm display is always blank although the French alarm text displays correctly on second line. I've checked that date, time and alarm status texts are set correctly for French language- they appear to be OK. Also tried the usual rebuild / delete temporary files fixand still have the same problem. Even stranger, I've just run the project inruntime simulator and the alarms display correctly in both English and French. Therefore problem seems to only happen when running on the actual TP177 Micro hardware. Any ideas what is going wrong here? Best regards, Corby
CorbyLee Posts: 11 Rating: (1)
Suggestion To thank Quote Answer

11/3/2008 3:51 PM	Rate (0)
The Brain Gold Member Joined: 10/19/2005 Last visit: 11/30/2020 Posts: 1611 Rating: (120)	Hi, did you have try to use a OS Update Maybe this could be helpful. -> http://support.automation.siemens.com/WW/view/de/19701610 If not, i think you have to contact the siemens hotline regards,

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on