Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TP177B Transfer Problem

Created by: eeegokhan at: 3/25/2008 7:53 AM (6 Replies)

Rating (0)

Thanks 0

7 Entries

3/25/2008 7:53 AM	Rate (0)
eeegokhan Posts: 33 Rating: (0)	Hi.I have a TP177DP.I cant transfer program.İt's give me "The Short path name is not available.Please assure that the short path name (8.3 name format) is enabled".What must I do ? Thanks...
eeegokhan Posts: 33 Rating: (0)
Suggestion To thank Quote Answer

3/25/2008 11:08 AM	Rate (0)
potretma Experienced Member Joined: 4/26/2007 Last visit: 8/15/2024 Posts: 120 Rating: (8)	Hi, which connection do you use for transfer?

Suggestion To thank Quote Answer

3/25/2008 1:38 PM	Rate (0)
eeegokhan Posts: 33 Rating: (0)	MPI connection.
eeegokhan Posts: 33 Rating: (0)
Suggestion To thank Quote Answer

3/25/2008 1:57 PM	Rate (0)
potretma Experienced Member Joined: 4/26/2007 Last visit: 8/15/2024 Posts: 120 Rating: (8)	Hi, it`s your transfer settingfor MPI/DP ? T. Attachment snap.jpg (129 Downloads)
	Last edited by: potretma at: 3/25/2008 2:46 PM
Suggestion To thank Quote Answer

3/25/2008 4:13 PM	Rate (0)
ZAK Gold Member Joined: 5/8/2006 Last visit: 10/16/2024 Posts: 1085 Rating: (78)	Hi, maybe this faq will help you: http://support.automation.siemens.com/WW/view/en/23802404 Bye

Suggestion To thank Quote Answer

5/7/2008 11:10 AM	Rate (0)
vrai-lxi Posts: 1 Rating: (0)	eeegokhan, I had the same problem with my C7-635 Key,becausefilesystemonmydiskdrivewithOSwasFAT32. Changingoffilesystemand reinstalling of WinCC flexible not helping. On other PC with NTFS file system WinCC Flexible works fine. So I reinstalling my Windows OS withdisk drive file system change to NTFS.
vrai-lxi Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

5/7/2008 5:57 PM	Rate (0)
ZAK Gold Member Joined: 5/8/2006 Last visit: 10/16/2024 Posts: 1085 Rating: (78)	... does it work? Bye

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on