Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TP27

Created by: Tekabi at: 6/20/2015 12:24 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

6/20/2015 12:24 PM	Rate (0)
Tekabi Bronze Member Joined: 2/8/2015 Last visit: 3/15/2023 Posts: 461 Rating: (8)	Helo Dear all, I want to connect to TP27 and do restore and backup operations from our HMI project with PG ( except SIEMENS PGs). Can we connect with TP27 by another PGs( except SIEMeNS PGs ) and also by PC? Which cable should we use for that? Thanks

Suggestion To thank Quote Answer

6/20/2015 1:13 PM	Rate (0)
MicroMan Platinum Member Joined: 11/29/2011 Last visit: 2/20/2023 Posts: 1347 Rating: (226)	HI, The same question asked here: Uploading from TP27 and Downloading to MP277 And here: About TP27 I hope I could help!
	- What you read here, please check with manuals and your requirements. - Do not forget to Test, Test and Test... - If the post is helpful, please RATE it! MicroMan
Suggestion To thank Quote Answer

6/20/2015 9:20 PM	Rate (0)
Tekabi Bronze Member Joined: 2/8/2015 Last visit: 3/15/2023 Posts: 461 Rating: (8)	Hi, What connecting cables are there for connections between operator panels ( TP27 ) and S7 controllers? Thanks

Suggestion To thank Quote Answer

6/20/2015 10:57 PM	Rate (0)
MicroMan Platinum Member Joined: 11/29/2011 Last visit: 2/20/2023 Posts: 1347 Rating: (226)	Hi, TP27, TP37 Touch Panels chapter "12.2.3 Connecting the PLC". I hope I could help!
	- What you read here, please check with manuals and your requirements. - Do not forget to Test, Test and Test... - If the post is helpful, please RATE it! MicroMan
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on