Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TP700 - can´t get no value from the CPU

Created by: adrian_botez at: 6/25/2014 5:44 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

6/25/2014 5:44 PM	Rate (0)
adrian_botez Bronze Member Joined: 2/19/2013 Last visit: 11/10/2024 Posts: 185 Rating: (9)	I have tryed both examples with a TP700 and a CPU 317, and I can´t get no value from the CPU, neither if the CPU goes on STOP or Offline. Any help?
	Last edited by: CS Moderator at: 6/30/2014 12:57 PM new question after splitting from /tf/WW/en/Posts/75849#top
Suggestion To thank Quote Answer

6/26/2014 8:40 AM	Rate (0)
K!ke Posts: 1299 Rating: (136)	Hello, which version of tia do you use? are both devices in the same project? do you have connection to the cpu? K!ke
K!ke Posts: 1299 Rating: (136)
Suggestion To thank Quote Answer

6/26/2014 3:19 PM	Rate (0)
adrian_botez Bronze Member Joined: 2/19/2013 Last visit: 11/10/2024 Posts: 185 Rating: (9)	I use V13 version of Tia Portal. The CPU project was made with Step 7 v5.5.
	Last edited by: adrian_botez at: 6/26/2014 3:20 PM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Communication

Follow us on