Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TP700 Comfort comunication problem

Created by: avtel at: 4/8/2013 12:54 PM (3 Replies)

Rating (0)

Thanks 2

4 Entries

4/8/2013 12:54 PM	Rate (0)
avtel Experienced Member Joined: 2/26/2013 Last visit: 2/22/2023 Posts: 48 Rating: (0)	Hello, I have a problem with HMI panel TP700 comfort! I cannot download nothing because in the middle of transfer there is a transfer error - see attached picture! Thank you in advance Attachment hmi.jpg (77 Downloads)

Suggestion To thank Quote Answer

4/8/2013 3:41 PM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 3/23/2023 Posts: 8586 Rating: (1125)	Hello avtel, Can you explain how you want to transfer a project to TP700? Which cable do you use etc. Best regards, Wizard

Suggestion To thank Quote Answer

4/8/2013 8:02 PM	Rate (0)
avtel Experienced Member Joined: 2/26/2013 Last visit: 2/22/2023 Posts: 48 Rating: (0)	Hello, thank you for your answer but I report back that I solved my problem. I had a problem because in existing project I changed an old HMI from tp177 to TP700 Comfort and after that I wasn't able to download nothing, but after a long day I solved the problem and I must admit that I dont have an idea how I done it. best regads

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Wizard O_Moderator

4/9/2013 9:19 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 3/23/2023 Posts: 8586 Rating: (1125)	Hello avtel, Great you solved your problem. Best regards, Wizard

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on