Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

trace freezing script

Created by: gpfl at: 5/23/2007 5:51 PM (16 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2; |

17 Entries

Entries per page: 10 | all

5/23/2007 5:51 PM	Rate (0)
gpfl Advanced Member Joined: 3/8/2006 Last visit: 7/9/2024 Posts: 15 Rating: (4)	Hey, How could I trace the script which is freezing ?
	Last edited by: gpfl at: 23.05.2007 17:52
Suggestion To thank Quote Answer

5/23/2007 6:06 PM	Rate (0)
Danielle Posts: 1275 Rating: (123)	Hi, Have you tried running your project under apdiag? Best regards, Danielle
Danielle Posts: 1275 Rating: (123)
Suggestion To thank Quote Answer

5/23/2007 6:19 PM	Rate (0)
gpfl Advanced Member Joined: 3/8/2006 Last visit: 7/9/2024 Posts: 15 Rating: (4)	Yes, but I want to only trace the freezing scripts into a file and I have some difficulty to parameter the APdiag for this.

Suggestion To thank Quote Answer

5/24/2007 11:40 AM	Rate (0)
Ikkezelf Posts: 1084 Rating: (72)	I normally put in some printf statements to determine which script is fault. Is that an Idea? I don't think it's possible to save to file the freezing scripts in apdiag.... But please correct me when I'm wrong. with regards, Ikkezelf
Ikkezelf Posts: 1084 Rating: (72)
Suggestion To thank Quote Answer

5/24/2007 12:24 PM	Rate (0)
gpfl Advanced Member Joined: 3/8/2006 Last visit: 7/9/2024 Posts: 15 Rating: (4)	Hi, Normally, with Apdiag, the "FistAction" in the queue can be logged in a file, but I create a script which loops during 40 s and when it runs, it isn't logged when I use the FistAction command. Doessomebobysee a other way to logged the freeze script. best regards,

Suggestion To thank Quote Answer

5/24/2007 1:56 PM	Rate (0)
Danielle Posts: 1275 Rating: (123)	Hi, Ikkezelf's idea may be a way, don't you think? You could print some statements on apdiag to follow up your scripts' execution... But maybe someone else has a way to do the file logging you need... Best regards, Danielle
Danielle Posts: 1275 Rating: (123)
Suggestion To thank Quote Answer

5/24/2007 2:16 PM	Rate (0)
gpfl Advanced Member Joined: 3/8/2006 Last visit: 7/9/2024 Posts: 15 Rating: (4)	Ikkezelf's idea is good if you know which script freeze. But for now I don't know the script which has trouble. If I put some printf for each script the trace will be to big. Does somebody knows if the graphic's scripts (C and VBS) and global scripts (actions)use the same queue ? Itcould help me to find out the script with problem.

Suggestion To thank Quote Answer

5/24/2007 2:46 PM	Rate (0)
Ikkezelf Posts: 1084 Rating: (72)	Hi, C and VBS have a different queue. Hence even the scripts put behind the properties and the events in the mimics have a different queue. Does that help?
Ikkezelf Posts: 1084 Rating: (72)
Suggestion To thank Quote Answer

5/24/2007 6:34 PM	Rate (0)
gpfl Advanced Member Joined: 3/8/2006 Last visit: 7/9/2024 Posts: 15 Rating: (4)	As I can see, there are 4 queues : VBS graphic scripts VBS global scripts C graphic scripts C global scripts Is this correct ? In this case,how can I find outwhich of the queue isblocked ?

Suggestion To thank Quote Answer

5/25/2007 9:29 AM	Rate (0)
Ikkezelf Posts: 1084 Rating: (72)	If i'm not mistaken these are the queues (but please correct me when I'm wrong): VBS graphic scripts on properties side VBS graphic scripts on events side VBS global scripts C graphic scripts on properties side C graphic scripts on events side C global scripts There you have a hanging script....I still would go for the printf solution. with regards, Ikkezelf
Ikkezelf Posts: 1084 Rating: (72)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on