Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

transferring & reading data to bus stations.

Created by: Tomy Master at: 8/24/2009 11:24 AM (3 Replies)

Rating (0)

Thanks 1

4 Entries

8/24/2009 11:24 AM	Rate (0)
Tomy Master Gold Member Joined: 5/4/2009 Last visit: 11/23/2024 Posts: 914 Rating: (40)	Hello experts... I am wondering if we can use the "USS_DRV" block instruction to access 16 stations at the same time? And if it is so, how could it be done? I need a snap shot explaining it, please. Regards. Tomy the Master.
	Aim Higher
Suggestion To thank Quote Answer

8/24/2009 11:56 AM	Rate (0)
Robster Gold Expert Joined: 5/28/2008 Last visit: 10/23/2024 Posts: 1343 Rating: (141)	Hi, have you seen this Example: http://support.automation.siemens.com/WW/view/en/37604154 There are 4 USS drives in use

Suggestion To thank Quote Answer

8/24/2009 2:23 PM	Rate (0)
bakerjw Posts: 126 Rating: (18)	Are you referring to a broadcast? USS broadcasts are not supported in the USS library. In order to control 16 drives, you will most likely need 16 USS_DRV function blocks in your program.
bakerjw Posts: 126 Rating: (18)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Tomy Master

8/24/2009 4:28 PM	Rate (0)
Tomy Master Gold Member Joined: 5/4/2009 Last visit: 11/23/2024 Posts: 914 Rating: (40)	Thank you Bakerjw... What I really meant is how many USS_DRV function blocks we have to use to control 16 drives, and you have answered me clearly. Have luck. Tomy the Master.
	Aim Higher
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on