Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Trend view's value table is broken

Created by: budtse at: 1/18/2008 2:59 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

1/18/2008 2:59 PM	Rate (0)
budtse Posts: 13 Rating: (0)	Hi all, I have this weird problem with the trend view: trends are shown correctly, but the values table below the trend seems to be broken. All it shows is it's windowframe and title, and a piece of the previously opened window (see attachment). The problem occurs on both the WinCC 6.0 server as on all 3 clients. Has anyone seen this problem before ? Is there a way to install the trend view component again without setting up the entire WinCC package ? thanks, Budtse Attachment Screenshot_Trends_Problem.gif (49 Downloads)
budtse Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

1/18/2008 4:29 PM	Rate (0)
Irmantas Bronze Member Joined: 3/7/2006 Last visit: 4/26/2023 Posts: 42 Rating: (7)	I think problem is that computer or wincc was in shutdown at this trend break time.

Suggestion To thank Quote Answer

1/30/2008 1:45 PM	Rate (0)
budtse Posts: 13 Rating: (0)	Do you mean the server station ? No, that was running. The problem occurs on all stations: the server, 2 clientsand an engineering station. Weird thing that in december everything worked great. Anyway, a case was opened at Siemens support, so i hope to find a solution there.
budtse Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on