Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TrendView in Report - Change TimeRange (TimeAxis)

Created by: andre_pulse at: 5/16/2014 11:04 AM (10 Replies)

Rating (1)

Thanks 7

Result pages:: |; 1 | 2; |

11 Entries

Entries per page: 10 | all

5/16/2014 11:04 AM	Rate (0)
andre_pulse Posts: 30 Rating: (4)	Hello I work with TIA Portal Prof v13 and PC Station. I have Report with "f(t) trendView" which has assigned to logging tag. Can I change Timerange of trendview in Runtime? For example in one case I need to show in Report last 5 minutes, in another case last 11 minutes or time range 10:00 - 11:00. Hope I clear in my question. Regards, Andrew
andre_pulse Posts: 30 Rating: (4)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users rossubedi

5/16/2014 12:04 PM	Rate (0)
Jens_app Gold Member Joined: 1/5/2011 Last visit: 11/29/2024 Posts: 815 Rating: (123)	andre_pulse Hello I work with TIA Portal Prof v13 and PC Station. I have Report with "f(t) trendView" which has assigned to logging tag. Can I change Timerange of trendview in Runtime? For example in one case I need to show in Report last 5 minutes, in another case last 11 minutes or time range 10:00 - 11:00. Hope I clear in my question. Regards, Andrew Hi Andrew, If you create a trend and enable the toolbar, then you can press the magnifier glass + or - to increase or decrease time interval in runtime. I do not know the maximum or minimum time interval that can be set. I hope that it helps Kind regards, Jens
	Keep it simple and on-topic. A simple straight-to-the-point answer is often of more quality than a complicated one.
Suggestion To thank Quote Answer

5/19/2014 8:10 AM	Rate (0)
andre_pulse Posts: 30 Rating: (4)	Hello,Jens. Thank you for your reply. In my case TrendView is only in Report form, not on screen page. I have made screenshot which shows what I mean (in attachment). And main purpose is automatically print correct report without operator actions. For that I need to know how I can change timerange of trendview in report in runtime. Regards, Andrew Attachment report.jpg (721 Downloads)
andre_pulse Posts: 30 Rating: (4)	Last edited by: andre_pulse at: 5/19/2014 9:22 AM
Suggestion To thank Quote Answer

5/19/2014 9:51 AM	Rate (0)
S7 AUTOMAN Posts: 515 Rating: (56)	andre_pulse Hello I work with TIA Portal Prof v13 and PC Station. I have Report with "f(t) trendView" which has assigned to logging tag. Can I change Timerange of trendview in Runtime? For example in one case I need to show in Report last 5 minutes, in another case last 11 minutes or time range 10:00 - 11:00. Hope I clear in my question. Regards, Andrew hello, isnt there a selection button for time range in your runtime trend window? i havent worked with V13 yet but it was well available with Wincc explorer. And i hope it will be available with V13 also. Check the properties for the trend window, may be you need to enable it
S7 AUTOMAN Posts: 515 Rating: (56)
Suggestion To thank Quote Answer

5/19/2014 10:08 AM	Rate (0)
Madhava Silver Member Joined: 11/26/2011 Last visit: 6/29/2023 Posts: 508 Rating: (23)	S7 AUTOMAN andre_pulse Hello I work with TIA Portal Prof v13 and PC Station. I have Report with "f(t) trendView" which has assigned to logging tag. Can I change Timerange of trendview in Runtime? For example in one case I need to show in Report last 5 minutes, in another case last 11 minutes or time range 10:00 - 11:00. Hope I clear in my question. Regards, Andrew hello, isnt there a selection button for time range in your runtime trend window? i havent worked with V13 yet but it was well available with Wincc explorer. And i hope it will be available with V13 also. Check the properties for the trend window, may be you need to enable it In Wincc V7 the option is available to change the time of X axis. There must be an option on V13 too. In wincc eithere you can change by properties of trend or by some scripts to change the property.

Suggestion To thank Quote Answer

5/19/2014 11:29 AM	Rate (0)
andre_pulse Posts: 30 Rating: (4)	Thank you for advices but note that in my case TrendView is only in Report form, not on screen. Attachments - report editorscreenshot. Regards, Andrew Attachment report.jpg (602 Downloads)
andre_pulse Posts: 30 Rating: (4)	Last edited by: andre_pulse at: 5/19/2014 11:30 AM
Suggestion To thank Quote Answer

5/22/2014 1:40 PM	Rate (1)
andre_pulse Posts: 30 Rating: (4)	andre_pulse Thank you for advices but note that in my case TrendView is only in Report form, not on screen. I have found the solution. The problem is solved by switching properties window (Trendview) in the "list" view and then assigning tags for time range. "Pages" view is the default and you can not assign tags. Regards, Andrew
andre_pulse Posts: 30 Rating: (4)
Suggestion To thank Quote Answer
This contribution was helpful to 5 thankful Users Frederik K!ke al_x_gan Rockon diliegrOS

5/22/2014 1:59 PM	Rate (0)
Madhava Silver Member Joined: 11/26/2011 Last visit: 6/29/2023 Posts: 508 Rating: (23)	Thanks for Sharing

Suggestion To thank Quote Answer

9/3/2015 5:17 PM	Rate (0)
al_x_gan Posts: 4 Rating: (0)	Thank you.
al_x_gan Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

6/10/2016 12:00 PM	Rate (0)
UDT Posts: 34 Rating: (1)	andre_pulse andre_pulse Thank you for advices but note that in my case TrendView is only in Report form, not on screen. I have found the solution. The problem is solved by switching properties window (Trendview) in the "list" view and then assigning tags for time range. "Pages" view is the default and you can not assign tags. Regards, Andrew I try to send begin datetime and end datetime in trendview on report form. Unsuccessfull. Set start and end for time axis: 1. switch to property list 2. Time axis -> Time axes -> Time axis -> Begin time, End time I connect variables 'datetime' type to "Begin time" and "End time", properties accepted (see attached screenshot), but time axis on screen not changed according new settings (see screenshot) what I doing wrong ? Attachment 123.png (501 Downloads)
UDT Posts: 34 Rating: (1)	Last edited by: f-kons at: 6/10/2016 1:22:30 PM Last edited by: f-kons at: 6/10/2016 1:22:46 PM Last edited by: f-kons at: 6/10/2016 1:25:54 PM Last edited by: f-kons at: 6/10/2016 1:29:18 PM Last edited by: f-kons at: 6/10/2016 1:30:50 PM Last edited by: f-kons at: 6/10/2016 1:31:15 PM
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users fuglytwatapuss

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Prof Picture Controls

Follow us on