Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Troubles with calling standart functions in C-Scripts.

Created by: AlexanderTrofimov at: 1/14/2009 8:01 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

1/14/2009 8:01 AM	Rate (0)
AlexanderTrofimov Posts: 2 Rating: (0)	Hello. I have a problem. I created WinCC project, the Continious Casting Machine. Everything was OK, when I tested it on my own computer, using the Virtual Machine. I send it to guys, who tested it on plant, but on their computers there was a problem: in the whole project was problems with standart functions. For example, on the starting window, where you need to enter your login and password, for calling a dialog window I used the standart function PASSLoginDialog, but it didn't work. I used the program apdiag.exe. It shown me next statement: PASSLoginDialog:unresolved external function. Other functions don't work too. On my computer and computers of my co-projecters everything is OK. But on the computer of another guy is the same problem. What can be the cause of problem? How can I solve it? Thank you.
AlexanderTrofimov Posts: 2 Rating: (0)	Last edited by: AlexanderTrofimov at: 1/14/2009 8:09 AM
Suggestion To thank Quote Answer

1/14/2009 9:08 AM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 7/12/2023 Posts: 10221 Rating: (1177)	Hello Alexander, Did you check if version of WinCC plus SP, HF and OS are the same on your PC and "problems" PC? You can try also with other project, which they can open and sent it after you open and save on your PC and return back. regards

Suggestion To thank Quote Answer

1/14/2009 10:11 AM	Rate (0)
AlexanderTrofimov Posts: 2 Rating: (0)	UMENCHO, guy, who is working on the problem PC, created new project, copied some of those functions, and it worked! So, I think, the problem is not in version of WinCC, but in project itself. Maybe, project can't find a path for function library, which is kept in shared folder /WinCC/aplib? But why in another project it works? thanks
AlexanderTrofimov Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

1/26/2009 2:38 PM	Rate (0)
April Posts: 1776 Rating: (95)	Hi, maybe this FAQ gives some hints http://support.automation.siemens.com/WW/view/en/28866110
April Posts: 1776 Rating: (95)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on