Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

trying to configure card 6ES7 134-4NB01-0AB0 on TIA PORTAL V15

Created by: BerserkBiel at: 9/28/2019 12:23 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

9/28/2019 12:23 AM	Rate (0)
BerserkBiel Posts: 1 Rating: (0)	I am trying to configure card 6ES7 134-4NB01-0AB0 on TIA PORTAL V15, no signal is output, no simatic handling works, what way to fix this problem ------------------------------------------------------------------------------------------ Split from Installation problem TIA portal 15.1.
BerserkBiel Posts: 1 Rating: (0)	Last edited by: CS Moderator at: 09/29/2019 11:05:56 New subject after splitting
Suggestion To thank Quote Answer

9/29/2019 4:26 PM	Rate (0)
CaOd Platinum Expert Joined: 5/6/2010 Last visit: 6/2/2023 Posts: 1884 Rating: (255)	Hello, I would do the follow: check the base unit if it's the right one (please look at the manual) check the wiring check your device configuration do you download the configuration? are there some diagnostic messages? do you have a connection to the module? how look your function to control the module/signals Please let us know the results of this checks, then it's easier to help you with your specific problem regards CaOd

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on