Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Two inverters, display and linear encoder

Created by: FAMAD at: 10/16/2017 12:52 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

10/16/2017 12:52 PM	Rate (0)
FAMAD Posts: 2 Rating: (0)	I have bought the S7-1212c starter kit with hmi400 display and the CM 1241-RS422 / 485 communication module. I also have two inverters with main module SINAMICS G120 CU240E-2PE if I supply good data) FMAX readout line after RS422 As an additional activity, I need to write a control program so that one inverter will raise and lower the brushes to the desired height the value to be lifted or lowered is to be entered on the panel and after pressing START the engine needs to be positioned. The second inverter is to control the feeder, the speed of the movement is to be entered from the panel. This is the first meeting with this software and the PROFINET network I would ask for advice, help, some sample program to know where to start. I have the software SIMATIC STEP 7 Basic V14 SP1
FAMAD Posts: 2 Rating: (0)	Last edited by: FAMAD at: 10/16/2017 12:53:37 PM Last edited by: FAMAD at: 10/16/2017 12:54:10 PM Last edited by: FAMAD at: 10/16/2017 12:54:30 PM Last edited by: FAMAD at: 10/16/2017 12:54:52 PM Last edited by: FAMAD at: 10/16/2017 12:55:21 PM Last edited by: Jen_Moderator at: 10/16/2017 1:58:48 PM Edited post for better reading.
Suggestion To thank Quote Answer

10/16/2017 1:18 PM	Rate (0)
SMJE Silver Member Joined: 1/30/2006 Last visit: 9/16/2024 Posts: 310 Rating: (59)	Hi There are some videos on Youtube "Automation Tasks in 10 minuttes or Less". Try to check this link out regarding simple positioning https://youtu.be/K7nTFTVIDSQ
	Last edited by: SMJE at: 10/16/2017 1:18:57 PM Last edited by: Jen_Moderator at: 10/16/2017 2:01:10 PM Inserted Video. BR. Sven
Suggestion To thank Quote Answer

10/16/2017 2:07 PM	Rate (0)
FAMAD Posts: 2 Rating: (0)	Everything is on the PROFINET network
FAMAD Posts: 2 Rating: (0)	Last edited by: Jen_Moderator at: 10/16/2017 2:09:52 PM Edited text for better reading.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on