Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Type into function

Created by: _Kalle_ at: 10/24/2013 1:22 PM (5 Replies)

Rating (0)

Thanks 1

6 Entries

10/24/2013 1:22 PM	Rate (0)
_Kalle_ Posts: 62 Rating: (0)	Hello, I have this problem: I got a function that got a struct as an input: Input Input _1 bool _2 bool _3 bool : _32 bool I would like to call this fuction with different types of input, but I'm not allowed to call this function with an struct. How can I slove this ? With a pointer ? Please help! Kalle
_Kalle_ Posts: 62 Rating: (0)
Suggestion To thank Quote Answer

10/24/2013 1:40 PM	Rate (0)
hdhosseini Diamond Expert Joined: 1/28/2009 Last visit: 12/12/2024 Posts: 6858 Rating: (1365)	_Kalle_ Hello, I have this problem: I got a function that got a struct as an input: Input Input _1 bool _2 bool _3 bool : _32 bool I would like to call this fuction with different types of input, but I'm not allowed to call this function with an struct. How can I slove this ? With a pointer ? Please help! Kalle Hello, What type of CPU you are programming for?Normally you can define a same structure in a global DB or in temporary area of calling function(or OB) and assign it to the input of the mentioned function. Hope that helps Hamid Hosseini
	Demo Channel on Youtube
Suggestion To thank Quote Answer

10/24/2013 2:06 PM	Rate (0)
_Kalle_ Posts: 62 Rating: (0)	Thanks hdhosseini! The problem was that i used the sum function in a function block that got the variables as an "inout" and that does not work, becuase "inout" uses pointers I think ?
_Kalle_ Posts: 62 Rating: (0)
Suggestion To thank Quote Answer

10/24/2013 2:55 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 12/23/2024 Posts: 15531 Rating: (2461)	_Kalle_ Thanks hdhosseini! The problem was that i used the sum function in a function block that got the variables as an "inout" and that does not work, becuase "inout" uses pointers I think ? If you use the AT overlay for your interface, you can define the same input multiple ways. For example, 32-bools, 2-words, 4-bytes If you create a custom plc datatype, you may still want to define it as InOut, but that may make it easier to deal with.
	science guy
Suggestion To thank Quote Answer

10/24/2013 3:29 PM	Rate (0)
v.kerstholt Posts: 58 Rating: (9)	Solution is in here: /tf/WW/en/Posts/99281#top
v.kerstholt Posts: 58 Rating: (9)
Suggestion To thank Quote Answer

10/25/2013 10:50 AM	Rate (0)
_Kalle_ Posts: 62 Rating: (0)	Thanks all!!
_Kalle_ Posts: 62 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users hdhosseini

|

Share this page:

Share this page on...

Follow us on