Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

UDF block doesn't work correctly

Created by: SlipKnot at: 7/3/2020 10:32 AM (4 Replies)

Rating (0)

Thanks 1

5 Entries

7/3/2020 10:32 AM	Rate (0)
SlipKnot Posts: 3 Rating: (0)	Hi, all! Faced the next problem. I created UDF, as in the picture for this topic. When you use a UDF block, no clicks are counted inside it. When I expand UDF and make a simulation, everything works correctly. Are there any UDF restrictions that cause the block diagram to fail? How can I correct the scheme for UDF to work? Great thanks! Attachment Untitled.jpg (54 Downloads)
SlipKnot Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

7/3/2020 10:42 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/9/2023 Posts: 31592 Rating: (3928)	Hello SlipKnot, at first welcome to the forum. The problem is that you feed output # Q1 of the UDF back into the UDF. LSC allows this, but the UDF then does not work. One way can be to use a flag. Attachment Untitled.jpg (49 Downloads)

Suggestion To thank Quote Answer

7/3/2020 10:57 AM	Rate (0)
SlipKnot Posts: 3 Rating: (0)	Hi, ixo65! ixo65 Hello SlipKnot, at first welcome to the forum. The problem is that you feed output # Q1 of the UDF back into the UDF. LSC allows this, but the UDF then does not work. One way can be to use a flag. This I have already tried - UDF does not reset the counter block B005 "DoubleTap" on cheme...
SlipKnot Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

7/3/2020 10:58 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/9/2023 Posts: 31592 Rating: (3928)	Please upload your UDF as a zip file

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users SlipKnot

7/3/2020 12:15 PM	Rate (0)
SlipKnot Posts: 3 Rating: (0)	Sorry, I mistaked with link... Great thanks!!!
SlipKnot Posts: 3 Rating: (0)	Last edited by: SlipKnot at: 07/03/2020 12:25:05
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on