Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Ultramat 6F CO2 analyzer calibration

Created by: Open_Sense at: 2/10/2010 7:10 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

2/10/2010 7:10 PM	Rate (0)
Open_Sense Posts: 2 Rating: (0)	i have ultramat 6F co2 analyzer while i'm trying to calibrate it i inserted Nitrogen at both side of the detector(REF and MEASURE), ok and after stablization i ZAROed it, and after that i gave it the span gas (span gas directly goes to meas side and also to ref side but in ref side throw CO2 absorber) ok so no problem till now, after i finished i checked its performance Against span gas throw the both sides and it readed zero and also against nitrogen at both side it readed zero also, but when i tryed the same but with the process sample it gave high reading, WHY
Open_Sense Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

2/12/2010 1:02 PM	Rate (0)
Tribute Regular Member Joined: 3/27/2007 Last visit: 10/6/2016 Posts: 13 Rating: (2)	Dear Open_Sense, in this case please contact: helpdesk.gasanalytics.i-ia@siemens.com Best regards, Tribute

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on