Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Ultrasonic transmitters

Created by: ShahinM at: 12/31/2007 2:03 PM (3 Replies)

Rating (3)

Thanks 0

4 Entries

12/31/2007 2:03 PM	Rate (1)
ShahinM Silver Member Joined: 11/8/2005 Last visit: 6/5/2024 Posts: 335 Rating: (3)	1. Can I use different type of transducers with oneLU10 or LU02 at the same time? For example: XPS-15, XPS-30, XPS-40 & XRS-5. 2. For wiring between transducer and transmiter for distances about 70, 150, 250, 350 m what kind of cable Icanuse? RG-62 A/U or Twisted pair braided and shielded.
	Last edited by: SM at: 31.12.2007 14:59
Suggestion To thank Quote Answer

1/3/2008 7:38 AM	Rate (1)
HFP Posts: 3 Rating: (1)	1. Yes you can use all of your mentioned transducers with the Sitrans LU10 at the same time. You just need to program each channel with the correct transducer code which you can find in the manual. 2. The recommended cable between the transducer and the LU is a RG62 A / U Coax. The maximum cable lenght for each transducer is 365 m (1200 ft). Please note that the transducer cables must be run in a grounded metal conduit separate from other wiring (except TS-3 temperature sensor wiring, if applicable).
HFP Posts: 3 Rating: (1)
Suggestion To thank Quote Answer

1/9/2008 11:19 PM	Rate (1)
SonicRanger Posts: 151 Rating: (8)	Hi SM, The LU10 is even compatible with the older non-temperature compensated transducers like the ST25, ST50, LR21 and LR13. Best Regards, SonicRanger.
SonicRanger Posts: 151 Rating: (8)
Suggestion To thank Quote Answer

12/27/2016 11:14 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 12/9/2024 Posts: 4114 Rating: (195)	New question published by m.ahmed is split to a separate thread with the subject Ultrasonic transmitters - P790 HARDWARE ERROR DISPLAY . Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on