Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Unable to displayCPU Messages in WinCC Stand alone station

Created by: SN_2007 at: 8/8/2007 5:14 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

8/8/2007 5:14 AM	Rate (0)
SN_2007 Member Joined: 8/3/2007 Last visit: 8/8/2007 Posts: 4 Rating: (0)	Hi, I am unable to display CPU Messagesin stand alone WinCC Station, Also i have AS-OS Engineering installed with WinCC V6.2 InstallationTo DisplayCPU Messagesin Wincc i did the following. 1. I createda raw tag of type raw event. 2. Imported the CPU system Messages to WInCC Alarm Editor with same raw tag name asused in WinCC 3. Established connection between WinCC Station & CPU. Please let me know where i have gone wrong Regards SN

Suggestion To thank Quote Answer

8/8/2007 11:32 AM	Rate (0)
April Posts: 1776 Rating: (95)	Hi, Have You found the FAQ http://support.automation.siemens.com/WW/view/en22727527 There is a description for your problem April
April Posts: 1776 Rating: (95)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on