Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Unable to get IEC_Timer data type in drop down list

Created by: Abhisan at: 6/17/2014 1:15 PM (6 Replies)

Rating (1)

Thanks 3

7 Entries

6/17/2014 1:15 PM	Rate (0)
Abhisan Posts: 7 Rating: (0)	Hi Not able to get this IEC_Timer data Type in a Drop down List.. Attachment DataType.jpg (455 Downloads)
Abhisan Posts: 7 Rating: (0)	Last edited by: Narrator1 at: 6/17/2014 4:08 PM Topic split from /tf/WW/en/Posts/83394#top
Suggestion To thank Quote Answer

6/17/2014 3:14 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 12/23/2024 Posts: 15531 Rating: (2462)	Abhisan Hi Not able to get this IEC_Timer data Type in a Drop down List.. Start typing, IEC_ and the list of IEC datatypes should appear. If not, just type IEC_TIMER as the datatype.
	science guy
Suggestion To thank Quote Answer

6/17/2014 3:35 PM	Rate (0)
Abhisan Posts: 7 Rating: (0)	please find the attachment..not able to assign IEC_Timer.. Attachment DataType2.jpg (436 Downloads)
Abhisan Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

6/17/2014 3:37 PM	Rate (0)
Abhisan Posts: 7 Rating: (0)	Not able to get in drop down. Attachment DataType1.jpg (348 Downloads)
Abhisan Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

6/17/2014 4:27 PM	Rate (0)
Kelu Posts: 88 Rating: (12)	Hello, When you drag and drop in your SCL code a IEC Timers TON, choise multi-instance. it will add automatically the correct datatype in static. See my picture... Regards, Attachment Forum_IECTIMER.jpg (417 Downloads)
Kelu Posts: 88 Rating: (12)
Suggestion To thank Quote Answer

6/17/2014 4:44 PM	Rate (1)
Kelu Posts: 88 Rating: (12)	Kelu Hello, When you drag and drop in your SCL code a IEC Timers TON, choise multi-instance. it will add automatically the correct datatype in static. See my picture... Regards, I notice that datatype declaration is different according to block language. - In SCL it is TON_TIME, TOF_TIME - In LAD it is always IEC_TIMER It is why everybody make confusion. Attachment Forum_IECTIMER2.jpg (398 Downloads)
Kelu Posts: 88 Rating: (12)	Last edited by: Kelu at: 6/17/2014 4:44 PM
Suggestion To thank Quote Answer
This contribution was helpful to 3 thankful Users Tomy Master vipz Petr Broza

6/23/2014 1:03 PM	Rate (0)
Narrator1 Bronze Member Joined: 3/25/2013 Last visit: 3/21/2019 Posts: 176 Rating: (1)	Abhisan Thanks. Its Working Now. But Now I Have new Issue.. (...) New question split intowhile Downloading I am getting Error as "Insufficient memory space". With best regards, Narrator1

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on