Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Unified Alarm Text not updating

Created by: Vijay Vee at: 11/20/2023 9:36 AM (4 Replies)

Rating (0)

Thanks 2

5 Entries

11/20/2023 9:36 AM	Rate (0)
Vijay Vee Bronze Member Joined: 9/14/2012 Last visit: 1/16/2025 Posts: 91 Rating: (15)	Dear Experts, I am using Siemens MTP 1200 unified Comfort panel. I have modified the existing alarm text (Example "Spare alarm " to change "Inverter 1 Fault"). after downloading the hmi is not showing the updated text. even though i have deselected the "Runtime values" "Keep current values of tags and pending alarms in the runtime" and "Reset the all the logs"(See the Attachment). i have tried reboot the hmi panel also. Still its not updated. i needs to some other configuration. Am i missing something ? kindly help me resolve the issue. Thanks in Advance ! Regards, Vijay Attachment Unified Alarm text update issue.png (293 Downloads)
	Regards, Vijay
Suggestion To thank Quote Answer

11/20/2023 10:21 AM	Rate (0)
Stefan Arcularius Platinum Expert Joined: 1/21/2013 Last visit: 1/17/2025 Posts: 3436 Rating: (542)	Hi Vijay, Please tell us your problem. Are you using discrete or analog alarms within the HMI or are you using controller alarms (see User-defined alarms)? Is the alarm already active when you change its text? Is alarm persistency enabled on the Unified Comfort Panel? Which version of WinCC Unified are you using and which image version is running on your panel? Kind regards Stefan

Suggestion To thank Quote Answer

11/20/2023 10:46 AM	Rate (0)
Vijay Vee Bronze Member Joined: 9/14/2012 Last visit: 1/16/2025 Posts: 91 Rating: (15)	Hi Stefan, Thank you for the reply, Are you using discrete or analog alarms within the HMI or are you using controller alarms (seeUser-defined alarms)? - It's discrete alarm Is the alarm already active when you change its text? - Yes it's an active alarm Isalarm persistencyenabled on the Unified Comfort Panel? - Tag logging right ?,Yes its activated Which version of WinCC Unified are you using and which image version is running on your panel? - Panel version - V18.0.0.1( Software version TIA v17 update5) My answer is in Bold letters Regards, Vijay
	Last edited by: Vijay Vee at: 11/20/2023 10:51:16 Regards, Vijay
Suggestion To thank Quote Answer

11/20/2023 10:55 AM	Rate (0)
rdoliveira Gold Expert Joined: 4/26/2012 Last visit: 1/17/2025 Posts: 1584 Rating: (171)	Hello, do you use more than one language? Does it still show the previous text? Did you try to recompile the entire project again? good luck.
	Last edited by: rdoliveira at: 11/20/2023 10:57:24 edit "Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer

11/20/2023 1:55 PM	Rate (0)
Vijay Vee Bronze Member Joined: 9/14/2012 Last visit: 1/16/2025 Posts: 91 Rating: (15)	Hello, After downloading again and reboot the Hmi Panel. It's working. I didn't know the answer. But its working. Thank you for the support Mr.Stefan & Mr.rdoliveira Regards, Vijay
	Regards, Vijay
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Stefan Arcularius rdoliveira

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on