Hello Siemens Forumers

I have just unboxed and powered up my third Simatic Unified HMI and where I was able to get in to Service and Commissioning to select my transfer channel it is now asking me for a Username and Password login

Is there now a out of the box default username and password to get in to the display parameters?

admin, no password.

Ok this is how I got it right

I had to first choose the HMI which was found in extended download to device which found its MAC address and then I tried to download to it.

The download failed but TIA then gives the display the IP address that you have assigned in the project.

You can then go to online access and click on online and diagnostics and navigate to reset to factory settings and then click the reset button.

This then reset the HMI and allowed me to get into Service and Commissioning without a user name and password.

I have attached a screenshot of where the reset to factory settings is.

Thanks

UMENCHO

admin, no password.

 Thank you for the suggestion, I didn't try this, I came right another way before seeing your post, I will try this first on my next display if I get that same issue 

The password protection for the Control Panel is deactivated when the HMI device is delivered, which means that all users can make changes in the Control Panel. As you wrote that is new panel so, it should have access to the control panel...

BR,

hristo

UMENCHO

The password protection for the Control Panel is deactivated when the HMI device is delivered, which means that all users can make changes in the Control Panel. As you wrote that is new panel so, it should have access to the control panel...

BR,

hristo

Yes this is what I am used to as well but in this case it was password locked out of the box which made me question if things had changed i.e maybe a default username and password, in this case all control icons on the left were password locked. 

UMENCHO

admin, no password.

 Hi, it's not working for me. I need to put in some password otherwise I can't click on the button log in.