Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Unified web page access without login

Created by: ErosMch1 at: 9/30/2022 7:01 AM (7 Replies)

Rating (0)

Thanks 4

8 Entries

9/30/2022 7:01 AM	Rate (0)
ErosMch1 Regular Member Joined: 6/27/2018 Last visit: 9/4/2024 Posts: 18 Rating: (0)	Good morning, Is it possible to access to unified web page (my op project) withouth login and password?

Suggestion To thank Quote Answer

9/30/2022 7:18 AM	Rate (0)
itafusna Silver Expert Joined: 2/17/2020 Last visit: 1/13/2025 Posts: 1164 Rating: (213)	Hi ErosMch1, Maybe you are looking for the Autologin to the Unified project? Please see. WinCC Unified V16: Auto login browser extension for google chrome Note: DerHecht4.0 is a user who has developed numerous step-by-step Unified examples and configurations in video format that I believe are very useful and interesting, so I recommend you take a look at his profile.
	A rating will be well appreciated.
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users ErosMch1 rdoliveira

9/30/2022 9:21 AM	Rate (0)
ErosMch1 Regular Member Joined: 6/27/2018 Last visit: 9/4/2024 Posts: 18 Rating: (0)	Yes, auto login. The one in the runtime manager seems to work only in the ip where runtime is installed. I will adapt that script for linux browser and try if it's working. Many thanks.

Suggestion To thank Quote Answer

10/3/2022 10:10 AM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 1/14/2025 Posts: 4392 Rating: (1462)	Hi, in V17 it is possible to set the auto login directly from the SIMATIC Runtime Manager, configuration (gear button), General tab
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

11/16/2022 1:33 PM	Rate (0)
ErosMch1 Regular Member Joined: 6/27/2018 Last visit: 9/4/2024 Posts: 18 Rating: (0)	The only way to bypass the login is with the autologin script? I enabled the autologin in "SIMATIC Runtime Manager" (settings - general - automatic login using user and password that I actually use in the attached screen) but is not working. If I open the page from the localhost it never ask for login, just inside the panel for the object that require autentication But if I open from a client, other pc or panel in the same network, it asks always for login. I also tried to enable "Anonymous" user in "Project - Security settings - Users and roles" with the HMI Monitor roles, not working. Is it possible to do it? Or just localhost can view the panel without login? Thank you. Attachment IMG_20221116_142142.jpg (701 Downloads)

Suggestion To thank Quote Answer

11/10/2023 12:07 PM	Rate (0)
last_bu Bronze Member Joined: 5/8/2012 Last visit: 12/11/2024 Posts: 33 Rating: (4)	ErosMch1 The only way to bypass the login is with the autologin script? I enabled the autologin in "SIMATIC Runtime Manager" (settings - general - automatic login using user and password that I actually use in the attached screen) but is not working. If I open the page from the localhost it never ask for login, just inside the panel for the object that require autentication But if I open from a client, other pc or panel in the same network, it asks always for login. I also tried to enable "Anonymous" user in "Project - Security settings - Users and roles" with the HMI Monitor roles, not working. Is it possible to do it? Or just localhost can view the panel without login? Thank you. Hi, did you find solution for auto login if client connects from other pc?

Suggestion To thank Quote Answer

11/20/2023 12:57 PM	Rate (0)
AutoGen_7017258 Joined: 11/28/2022 Last visit: 12/23/2024 Posts: 23 Rating: (0)	Hello, I update this issue. I have the same behavior described in the Siemens knowledge base. Do you know if there is a solution to fix this issue in v19 ? Siemens Knolewdge base : Note This behavior applies only to the server-side call to the runtime. If other devices access the runtime over the network, the behavior described in 2.1 applies. Login and logout behavior with WinCC Unified PC Runtime Note that "Automatic login with login data" doesn't work too on a client over the network.
	Last edited by: Jen_Moderator at: 11/21/2023 08:34:59 Link optimized.
Suggestion To thank Quote Answer

11/20/2023 2:21 PM	Rate (0)
Stefan Arcularius Platinum Expert Joined: 1/21/2013 Last visit: 1/14/2025 Posts: 3424 Rating: (534)	Hi, As far as I know, WinCC Unified PC Runtime V19 will come with a feature called "My WinCC Unified", which will allow to define client-specific rules (define start screen, define screen resolution, configure auto-login/logout). However, this will require a static IP address for the client and the auto-login will not allow to specify a user, it will be as described in 2.2 Automatic login without login data. Kind regards Stefan

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users AutoGen_7017258 Murof

|

Share this page:

Share this page on...

Follow us on