Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Unknown Object During OS Runtime

Created by: Hassan Hameed at: 8/11/2012 7:27 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

8/11/2012 7:27 AM	Rate (0)
Hassan Hameed Posts: 2 Rating: (0)	Hey everyone, recently i created a an analog input scaling faceplate using CFC charts. During runtime i faced illogical error on faceplate of unknown object . Please see the attached file & recommend a better solution Attachment FacePlate.pdf (68 Downloads)
Hassan Hameed Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

8/12/2012 6:30 AM	Rate (0)
Jazz_M Gold Member Joined: 9/6/2008 Last visit: 5/7/2022 Posts: 1121 Rating: (86)	Hi Well it seems that you have an missing picture or emf file, have you used any .emf file or .bmp file on the status display or extended status display. If yes then you will have to copy the picture or image file to the WinCC project your using in the GRACS folder. and press referesh and it will be ok. Have fun...
	Jazz
Suggestion To thank Quote Answer

8/14/2012 12:49 AM	Rate (0)
Hassan Hameed Posts: 2 Rating: (0)	Hi, I didn't used any picture for it, just created a faceplate using CFC. And in CFC I added Analog input block from the library, please suggest a solution for this. Thanks.
Hassan Hameed Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

8/14/2012 4:26 AM	Rate (0)
winarko Posts: 44 Rating: (0)	Hello, Is it a Single Station project? If yes you must changed the computer name in WinCC Explorer to match your computer name. If the problem still occur you may use OS Project Editor and then click OK,it will reorganize your picture again.. Regards..
winarko Posts: 44 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on