Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Unrecoverable Error Message

Created by: anirban at: 3/6/2008 11:54 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

3/6/2008 11:54 AM	Rate (0)
anirban Posts: 38 Rating: (3)	Hi Marcio This is Anirban again. I have another problem. I tried a lot but couldn't do anything. I am working in a PCS7 v7.0 project. Now when I am compiling the PCS chart folder, it is perectly OK. But when I tried to compile the OS through Simatic Manager then an error message is coming which is as follows.."The number of external DM variables in WinCC exceeds the permitted in Total Number". I deleted some of the chatrs from the Simatic Manager and then again compile but the same thing happened. I must told you that I am using process tag types for the charts in Simatic Manager. Do you have any kind of help regarding the problem. Regards Anirban Dey
anirban Posts: 38 Rating: (3)
Suggestion To thank Quote Answer

3/6/2008 1:11 PM	Rate (0)
April Posts: 1776 Rating: (95)	Hi, [snip] ... See FAQ http://support.automation.siemens.com/WW/view/en/26455612 [snip] ... Best regards April
April Posts: 1776 Rating: (95)	Last edited by: CS Moderator at: 07.03.2008 16:53 not relevant text deleted Last edited by: CS Moderator at: 07.03.2008 16:53 not relevant text deleted
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on