Navigation

Update time from HMI to CPU

Created by: PuikkoP at: 2/14/2014 10:11 AM (1 Replies)

2/14/2014 10:11 AM	Rate (0)
PuikkoP Posts: 31 Rating: (1)	Hello, I decided to ask how I can update time from HMI to CPU. I have set the DB1 to area pointer, but I can't get time to DB. Coordination is working I can see the life bit from HMI, but time is not updating. I added attachment to this reply. There you can see the DB and also Area pointer. I would like to see the time from HMI in that DB. So then I could update CPU time during complete restart or something. That way if CPU time is lost, it would update it from HMI and time is not correct it can be easily changed from HMI. Thanks alraedy for tips... =) Best regards, PP Attachment DATE_TIME.jpg (570 Downloads)
PuikkoP Posts: 31 Rating: (1)	Last edited by: CS Moderator at: 2/14/2014 10:54 AM new subject after splitting from /tf/WW/en/Posts/53780#top Last edited by: PuikkoP at: 2/14/2014 10:12 AM I''''''''m using comfort panel + 300 cpu + TIA12.
Suggestion To thank Quote Answer

2/14/2014 10:54 AM	Rate (1)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 1/14/2025 Posts: 8804 Rating: (1173)	Hello PuikkoP, Perhaps the following link might help: Clock synchronization between a HMI operator panel and a SIMATIC PLC Best regards, Wizard

Suggestion To thank Quote Answer