Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Updated CAD files

Created by: jc2605 at: 5/14/2013 11:23 PM (4 Replies)

Rating (0)

Thanks 1

5 Entries

5/14/2013 11:23 PM	Rate (0)
jc2605 Advanced Member Joined: 2/7/2012 Last visit: 8/22/2024 Posts: 52 Rating: (7)	Is there an update to the S7-1200 Laser and Wiring Diagrams file with the new 1500 cpu modules and new/updated signal modules? The one I have is from 2011 and there have been a lot of changes since then.

Suggestion To thank Quote Answer

5/30/2014 9:42 PM	Rate (0)
SMHZ Bronze Member Joined: 10/19/2012 Last visit: 4/17/2022 Posts: 315 Rating: (9)	Pls go to CAx generator link which is given for every product

Suggestion To thank Quote Answer

5/30/2014 9:47 PM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 12/2/2024 Posts: 10229 Rating: (1181)	SMHZ Pls go to CAx generator link which is given for every product OFT Unfortunately Siemens did't cover 100% all available modules there.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users SMHZ

5/31/2014 3:45 AM	Rate (0)
Ayman Elotaify Platinum Member Joined: 5/28/2008 Last visit: 12/17/2024 Posts: 4518 Rating: (841)	SMHZ Pls go to CAx generator link which is given for every product Hello, Exactly as Umencho told, that not all products are covered in CAx. And you can try "CAD Generator" from the following link: CAD CREATOR, dimension sheet and 2D/3D CAD generator Hope this helps.
	Ayman Elotaify
Suggestion To thank Quote Answer

5/31/2014 7:43 AM	Rate (0)
SMHZ Bronze Member Joined: 10/19/2012 Last visit: 4/17/2022 Posts: 315 Rating: (9)	UMENCHO SMHZ Pls go to CAx generator link which is given for every product OFT Unfortunately Siemens did't cover 100% all available modules there. Thanks for the correction.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on