Navigation

upgradation from S5 to S7 PLC

Created by: RAJKIRAN at: 11/8/2012 8:10 AM (3 Replies)

Rating (0)

Thanks 1

4 Entries

11/8/2012 8:10 AM	Rate (0)
RAJKIRAN Silver Member Joined: 8/18/2009 Last visit: 12/7/2024 Posts: 550 Rating: (33)	Dear Expert, We wantupgradation ofS5 115U system to S7 300 systemso which is best CPU we can use. Also where I got manual doc. related to replacement of S5 to S7 System.
	Rajkiran Patil
Suggestion To thank Quote Answer

11/8/2012 12:58 PM	Rate (0)
Darius Platinum Expert Joined: 9/28/2005 Last visit: 12/10/2024 Posts: 2957 Rating: (243)	RAJKIRAN Dear Expert, We wantupgradation ofS5 115U system to S7 300 systemso which is best CPU we can use. Also where I got manual doc. related to replacement of S5 to S7 System. Any new S7-300 PLC will be faster than S5 115U and will have more memory and so on. So just look at the electrical drawings, count needed I/O and choose S7-300 which fits best. Despite the fact that there is some S5 to S7 program converter you can forget about using it. You will have lots of problems which will be needed to solve manually later. So I suggest to not to use any converter, but instead read S5 program and convert to S7 manually.
	Best regards, Darius
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users RAJKIRAN

11/8/2012 1:12 PM

Rate (0)

falki

Bronze Member

Joined: 1/8/2008

Last visit: 5/14/2024

Posts: 264

Rating:

(45)

Hi Darius,

look at "SIMATIC STEP 7 V5.5 From S5 to S7" in Simatic support
Entry ID:45531547 Date:2010-10-01

11/8/2012 1:14 PM

Rate (0)

Darius

Platinum Expert

Joined: 9/28/2005

Last visit: 12/10/2024

Posts: 2957

Rating:

(243)

falki
Hi Darius,

look at "SIMATIC STEP 7 V5.5 From S5 to S7" in Simatic support
Entry ID:45531547 Date:2010-10-01

Yes I know that and was talking about that. In theory it's very nice, but try it in practice with complex program which uses networks, connections and other fancy stuff then you will see that S5 to S7 converter is not the tool you want to use.

Best regards,
Darius

Share this page:

Share this page on...

upgradation from S5 to S7 PLC

Created by: RAJKIRAN at: 11/8/2012 8:10 AM (3 Replies)

Rating (0) Thanks 1

4 Entries

RAJKIRAN

Darius

This contribution was helpful to

falki

Darius

4 Entries

Follow us on

Rating (0)

Thanks 1