Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Upload ET 200S program

Created by: masobhy86 at: 10/7/2009 2:22 PM (4 Replies)

Rating (1)

Thanks 0

5 Entries

10/7/2009 2:22 PM	Rate (0)
masobhy86 Posts: 24 Rating: (0)	Hello, I am abeginner in this field I have IM 151-8 PN/DP CPU interface module and I need to upload its userprogram to my PC also any body tell me how can I upload the program from SIMATIC Micro Memory Card and if I have to replace the card how can I download program on it Thanks .
masobhy86 Posts: 24 Rating: (0)	Last edited by: masobhy86 at: 10/7/2009 2:24 PM Last edited by: masobhy86 at: 10/7/2009 2:23 PM
Suggestion To thank Quote Answer

10/10/2009 8:42 PM	Rate (1)
jklm Platinum Member Joined: 12/22/2006 Last visit: 1/25/2022 Posts: 1742 Rating: (303)	Hello, - Connect directly to the CPU with a Ethernet cable. - set the PG/PC interface for S7 online to Ethernet TCP/IP - In Step7, using the function PLC ==> Edit ethernet Node ==> Browse, you can detect the IP address of the IM. - set the PC IP address in the same range as the one detected for the CPU - open a new project - start the function "upload station"
	Best regards jklm Suggestion was helpful? Feel free to rate it.
Suggestion To thank Quote Answer

10/11/2009 7:16 PM	Rate (0)
masobhy86 Posts: 24 Rating: (0)	Hello thanks for help I will try and tell you the result thanks alot
masobhy86 Posts: 24 Rating: (0)
Suggestion To thank Quote Answer

10/15/2009 2:36 PM	Rate (0)
masobhy86 Posts: 24 Rating: (0)	Hello , it worked well and the program uploaded important note : connect ethernet to slot 1or3 of IM 151-8 thanks alot again
masobhy86 Posts: 24 Rating: (0)
Suggestion To thank Quote Answer

4/16/2018 10:47 AM	Rate (0)
Jen_Moderator Moderator Joined: 6/19/2017 Last visit: 5/26/2023 Posts: 6894 Rating: (137)	New question published by Happy1314 is split to a separate thread with the subject Why can't detect the IP address with ET200S? . Best regards Jen_Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards Jen_Moderator
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on