Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Uploading v11. program

Created by: stamatis at: 10/10/2014 1:40 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

10/10/2014 1:40 PM	Rate (0)
stamatis Posts: 17 Rating: (0)	Good afternoon. I am trying to upload a v11 programm with TIA Porta 11 What i do is: 1. I create a new programm with the same CPU 2. I go on line with the PLC 3. I am trying to upload the existing program. After 10-20 seconds i take a message that the tia portal has a problem and must shut down. Does anyone know what can i do? Redards Stamatis
stamatis Posts: 17 Rating: (0)
Suggestion To thank Quote Answer

10/10/2014 2:54 PM	Rate (0)
Jens_app Gold Member Joined: 1/5/2011 Last visit: 11/29/2024 Posts: 815 Rating: (123)	stamatis Good afternoon. I am trying to upload a v11 programm with TIA Porta 11 What i do is: 1. I create a new programm with the same CPU 2. I go on line with the PLC 3. I am trying to upload the existing program. After 10-20 seconds i take a message that the tia portal has a problem and must shut down. Does anyone know what can i do? Redards Stamatis Have you downloaded the latest service pack and upgrades? SP2 upd5? Maybe that'll fix it... Or if you haven't tried this yet: reboot your computer.
	Last edited by: Jens_app at: 10/10/2014 2:57 PM Keep it simple and on-topic. A simple straight-to-the-point answer is often of more quality than a complicated one.
Suggestion To thank Quote Answer

10/10/2014 7:38 PM	Rate (0)
Josh Elliott Posts: 204 Rating: (29)	Hi, This is common error in TIA v11,i asked about this thing in siemens conferences so many times, the answer always a chuckle and "we are trying".
Josh Elliott Posts: 204 Rating: (29)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on