Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Urgent: SINAMICS S210 web server please

Created by: Nicholas2077 at: 11/1/2018 6:15 AM (7 Replies)

Rating (1)

Thanks 0

8 Entries

11/1/2018 6:15 AM	Rate (0)
Nicholas2077 Experienced Member Joined: 3/25/2015 Last visit: 10/30/2023 Posts: 94 Rating: (1)	Dear Expertise I got some trouble during commissioning of S210, and I had carefully read user manual, but the it not work as description of manual. 1. Every time I power off S210, the password of admin is lost, that mean there always first log in password set windows pop up when I power on S210, I have try with or with out CF card, same result. 2. After I set the admin password and login, it looks like i only got access of SINAMICS user, not Administrator User, there only 3 option available on the right side, HOME, Diagnostic, Backup/resotre, commissioning is not possible. Since the S210 do not support Starter, I have no idea how to continue, in user manual, the instruction is very simple, just log in and commissioning, but actually it completely not work as user manual. Attachment Capture.PNG (404 Downloads)
	Last edited by: Nicholas2077 at: 11/1/2018 6:17:01 AM Last edited by: Nicholas2077 at: 11/1/2018 6:17:31 AM Last edited by: Nicholas2077 at: 11/1/2018 6:18:46 AM
Suggestion To thank Quote Answer

11/1/2018 6:21 AM	Rate (0)
Nicholas2077 Experienced Member Joined: 3/25/2015 Last visit: 10/30/2023 Posts: 94 Rating: (1)	The web server screen shot in user manual. You can see, it completely different Attachment Capture.PNG (352 Downloads)

Suggestion To thank Quote Answer

11/1/2018 7:34 AM	Rate (1)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 10/2/2024 Posts: 22388 Rating: (3015)	Hello, can it be that no motor is connected to the S210? in this case the S210 drive is not run up complete and display no commissioning. Regards Chrisoph

Suggestion To thank Quote Answer

11/1/2018 9:12 AM	Rate (0)
Nicholas2077 Experienced Member Joined: 3/25/2015 Last visit: 10/30/2023 Posts: 94 Rating: (1)	Dear Yes, currently no motor connected. I will try connect a motor to check again.

Suggestion To thank Quote Answer

11/1/2018 9:44 AM	Rate (0)
Nicholas2077 Experienced Member Joined: 3/25/2015 Last visit: 10/30/2023 Posts: 94 Rating: (1)	Dear I just connect motor encoder, than the S210 ramp up. it wired that convert can not work stand along. whatever it solved.

Suggestion To thank Quote Answer

11/2/2018 8:40 AM	Rate (0)
TechSupport SINAM... Bronze-Expert Joined: 2/7/2018 Last visit: 3/14/2023 Posts: 181 Rating: (30)	Dear Nicholas2077, The SINAMICS S210 Drive System can only be parametrized when the 1FK2 Motor is connected. During boot-up the S210 searches for the connected motor (via DriveCliq) and presets the motor relevant parameters. When the S210 does not have any motor feedback (via DriveCliq) the S210 can not preset revelvant parameter, e.g. P1082 (maximum speed) and therefore no parameter can be set. Best Regards, Technical Support for SINAMICS S210

Suggestion To thank Quote Answer

11/2/2018 10:35 AM	Rate (0)
Nicholas2077 Experienced Member Joined: 3/25/2015 Last visit: 10/30/2023 Posts: 94 Rating: (1)	TechSupport SINAMICS S210 Dear Nicholas2077, The SINAMICS S210 Drive System can only be parametrized when the 1FK2 Motor is connected. During boot-up the S210 searches for the connected motor (via DriveCliq) and presets the motor relevant parameters. When the S210 does not have any motor feedback (via DriveCliq) the S210 can not preset revelvant parameter, e.g. P1082 (maximum speed) and therefore no parameter can be set. Best Regards, Technical Support for SINAMICS S210 Hi Expertise I'm curiosity that does S7-300 controlled setup is technical possible? I have check the application example of S71500 control programming, it's looks like the close loop control is implemented by PLC rather than SINAMICS, the only thing need is SINAMICS library. But it looks like S210 is not officially support S7-300 since the SINAMICS toolkit do not include S210. Do you have any opinion?
	Last edited by: Nicholas2077 at: 11/2/2018 10:36:35 AM
Suggestion To thank Quote Answer

11/2/2018 3:01 PM	Rate (0)
TechSupport SINAM... Bronze-Expert Joined: 2/7/2018 Last visit: 3/14/2023 Posts: 181 Rating: (30)	Dear Nicholas2077, The SINAMICS S210 Drive System is designed to operate with the S7-1500(T) Controllers. The S7-1500(T) controllers offers the Motion Control Technology functions (e.g. PositioningAxis) which are necessary for positioning tasks. We do not recommend to use a S7-300 Controller for the S210 Drive System. Hint: The speed control does not run in the PLC, this is made by the S210 itself. Only the positioning controller runs in the PLC (S7-1500). Best Regards, Technical Support for SINAMICS S210

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on