Navigation

Use a safety relais to cut off the power of a digital output card

Created by: ThomasKenis at: 10/1/2018 10:47 AM (1 Replies)

10/1/2018 10:47 AM	Rate (0)
ThomasKenis Posts: 2 Rating: (0)	Hello Is it possible to cut off the power supply to a digital output card? Because I want to use a safety relais to switch of a whole card when the emergency button is pushed. The type of the cpu and the output card are s7 1511-1pn and DQ 16x24VDC/0.5A HF. Thanks a lot!
ThomasKenis Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

10/1/2018 11:03 AM	Rate (0)
jacek d Platinum Member Joined: 9/23/2005 Last visit: 1/16/2025 Posts: 4849 Rating: (741)	Yes. Just cut 1L+ and/or 2L+ according to this manual.
	Last edited by: jacek d at: 10/1/2018 11:06:30 AM Regards, Jacek What is confusing you is the fact that you never see a number but always its digit representation. So you end up thinking that the number is the representation. - Andrej Bauer Any claims against me - based on whatever legal reason - resulting from the use of any code and/or ideas presented on this forum shall be excluded. #StayWithUkraine
Suggestion To thank Quote Answer