Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

use of tags property in winccflexible faceplate under property interface configuration

Created by: panks at: 12/3/2010 10:55 AM (5 Replies)

Rating (0)

Thanks 0

6 Entries

12/3/2010 10:55 AM	Rate (0)
panks Posts: 8 Rating: (0)	Hi All, I need help for my winccflex project. In this project Some faceplates are created. i want to know the the use of "tags" property under "property interface" in faceplate configuration. i am cleared about the "my property" but i want to know how the value is passed to the faceplate internal tag "Border" in attached file. Attachment Winccflex_Faceplate.JPG (153 Downloads)
panks Posts: 8 Rating: (0)	Last edited by: panks at: 12/3/2010 10:56 AM
Suggestion To thank Quote Answer

12/10/2010 9:57 AM	Rate (0)
Sandman Platinum Member Joined: 4/29/2010 Last visit: 9/21/2023 Posts: 1557 Rating: (161)	Hello, maybe this faq can be helpfull: http://support.automation.siemens.com/WW/view/en/21659040 best regards

Suggestion To thank Quote Answer

12/10/2010 11:45 AM	Rate (0)
panks Posts: 8 Rating: (0)	Hi Sandman Thanks for reply. I already went through that FAQ. In this they explainedabout properties, category & event configuration and notabout the tag property. I am looking for tag property...
panks Posts: 8 Rating: (0)	Last edited by: panks at: 12/10/2010 11:46 AM
Suggestion To thank Quote Answer

12/13/2010 4:12 PM	Rate (0)
seb_nancy Posts: 37 Rating: (0)	The left section of the property view shows a variety of categories from which you can select the various subcategories. The fields for configuring the selected property category are shown in the right section of the property view. As : Tag Name Connection of the tag Data type (int, dint, etc) Acquisition mode Acquisition cycle Array count
seb_nancy Posts: 37 Rating: (0)
Suggestion To thank Quote Answer

12/14/2010 6:19 AM	Rate (0)
panks Posts: 8 Rating: (0)	Hi Seb_nancy, Thanks for your answer. I am looking for the help on "how to use the Tag Property?" Your answer giving the overall idea.
panks Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

12/14/2010 8:17 AM	Rate (0)
Darius Platinum Expert Joined: 9/28/2005 Last visit: 8/22/2023 Posts: 2957 Rating: (242)	Hi, You use faceplate tag as normal tag, but only it is local to the faceplate. You can connect it to some faceptale object;s property and dynamically change it within the faceplate. I think faceplate tag explanation in online help system is more than enough. Have you checked it ? Just open WinCC Flexible help and navigate "WinCC Flexible Information System --> Working with WinCC Flexible --> Creating Screens --> Working with faceplates --> Creating and managing faceplates --> Creating faceplate tag". Read and it should be clear enough. Also you can make some test and see how it works.
	Best regards, Darius
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on