Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

user administration KTP400

Created by: jverscheure at: 8/26/2014 4:12 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

8/26/2014 4:12 PM	Rate (0)
jverscheure Posts: 10 Rating: (0)	Hi I am using a KTP400 Touch panel. I have configured user administration on a button for changing the settings of the application (TIA portal V11). When i press at that button a logon screen appears. You have to fill in username as well as password. I know it's possible toalready fill in a username so just a password is required. But i forget where i can change that. Does someoneknow the answer? Greetings
jverscheure Posts: 10 Rating: (0)	Last edited by: jverscheure at: 8/26/2014 4:13 PM
Suggestion To thank Quote Answer

8/27/2014 2:18 PM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 2/12/2025 Posts: 8845 Rating: (1181)	Hello jverscheure, Perhaps you can try the following: go to Runtime settings -> user administration and then you can choose the option: "Logon only with password" Best regards, Wizard

Suggestion To thank Quote Answer

8/27/2014 3:34 PM	Rate (0)
jverscheure Posts: 10 Rating: (0)	Thank you Wizard! There's just a problem with this solution. Icannot open runtime settings at the moment, very strange.
jverscheure Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on