Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

User Archive in WinCC RT v6.2

Created by: RasaIcce at: 8/26/2008 10:48 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

8/26/2008 10:48 PM	Rate (0)
RasaIcce Posts: 32 Rating: (0)	Hallo, I have a problem with User archive table element in runtime version of WinCC v6.2. I have two computers.At the first I have WinCC v6.2 SP2 RC (8129),at the second WinCC RT v6.2 (8129). I made project in WinCC v6.2 RC(8129) on the first computer and used User archive table element.When I start this aplicationin RC version everything is ok ,but when I transfer aplicationon the first computer and start I could't seeUser archive table element. Why? I did't gat any error message and on place where I putUser archive table element I saw white rectangle. Please halpe me !
RasaIcce Posts: 32 Rating: (0)
Suggestion To thank Quote Answer

8/26/2008 11:14 PM	Rate (0)
JMJ Posts: 487 Rating: (45)	I think you have not installed User Archive option software on the second computer. Install this and you should be fine
JMJ Posts: 487 Rating: (45)
Suggestion To thank Quote Answer

8/28/2008 10:19 PM	Rate (0)
RasaIcce Posts: 32 Rating: (0)	Than you very much .
RasaIcce Posts: 32 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on