Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

user who acknowledges alarm

Created by: Fabio_156 at: 7/15/2024 9:27 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

7/15/2024 9:27 AM	Rate (0)
Fabio_156 Member Joined: 4/24/2020 Last visit: 9/2/2024 Posts: 1 Rating: (0)	Good morning experts I'm developing a runtime application with TIA19 unified update 2 I need to put a column in the alarm control where is displayed the user who acknowledged the alarms. it must then still appear in the alarm log. all my alarms are bit read on the plc I tried with the user name column, but the help says: "For alarms triggered by a variable, no user name is shown in the alarm display." In fact I don't see anything. I tried with the script using HMIRuntime.Alarming.SysFct.CreateSystemInformation but I don't understand where to find the information that is written. Do you have any more information? Thank you

Suggestion To thank Quote Answer

7/15/2024 4:47 PM	Rate (0)
itafusna Silver Member Joined: 2/17/2020 Last visit: 9/12/2024 Posts: 1058 Rating: (192)	Hi, I believe you are looking for this solution / workaround: "Log user who acknowledges alarm" forum thread
	A rating will be well appreciated.
Suggestion To thank Quote Answer

7/18/2024 12:23 PM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 9/12/2024 Posts: 13656 Rating: (1725)	Hello Fabio_156 Another way would be to use the Audit/GMP Option for Unified. Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on