Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

using 802c in DNC mode

Created by: is_razi at: 5/15/2010 5:51 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

5/15/2010 5:51 AM	Rate (0)
is_razi Experienced Member Joined: 3/13/2009 Last visit: 11/5/2024 Posts: 132 Rating: (1)	hi buddies, can somebody help me using 802c in DNC mode, thanks in advance
	Last edited by: is_razi at: 5/15/2010 5:51 AM
Suggestion To thank Quote Answer

5/15/2010 8:09 PM	Rate (0)
Pee El Sea Gold Member Joined: 1/19/2008 Last visit: 10/2/2024 Posts: 992 Rating: (64)	Hi, Not sure what you need to know. You hook up a device via RS232 with the program ready to transfer as if you were loading a program. Then select execute from external. The 802C will load as much of the program into the buffer as possible and execute when you press cycle start. When the buffer is full it will stop downloading the program. When the buffer is free it will download some more of the program.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on