Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

!> Using a constant to define the size of the array.

Created by: William_B at: 7/23/2014 1:18 PM (2 Replies)

Rating (0)

Thanks 3

3 Entries

7/23/2014 1:18 PM	Rate (0)
William_B Posts: 5225 Rating: (1182)	Hi there. The size of an array can be set by a constant. (TIA V13, S7-1200) Please see the attached image. The constant you declare can however not be changed in runtime. This can be useful when developing code that is reused in several projects and multiple arrays are declared within this code that has the same size. Hope this is useful to someone. Greetings. w Attachment Visual clue_Using a constant in declaring an array size.jpg (552 Downloads)
William_B Posts: 5225 Rating: (1182)
Suggestion To thank Quote Answer
This contribution was helpful to 3 thankful Users Afdeling_IA Kahl Vakman123

7/23/2014 1:33 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 12/9/2023 Posts: 13994 Rating: (2282)	Where was this post supposed to go?
	science guy
Suggestion To thank Quote Answer

7/23/2014 1:41 PM	Rate (0)
William_B Posts: 5225 Rating: (1182)	huggy_d1 Where was this post supposed to go? [smile] File this one under "Tips & Tricks" or "Random Code". It is a share.. not a question. Attachment Visual clue_Size of multiple arrays determined by a constant.jpg (489 Downloads)
William_B Posts: 5225 Rating: (1182)	Last edited by: William B. at: 7/24/2014 1:14 PM Add image to show possible use of technique.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on