Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Using a domain controller to control access to a simatic HMI

Created by: davidnovo at: 9/3/2014 10:09 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

9/3/2014 10:09 PM	Rate (0)
davidnovo Posts: 13 Rating: (0)	Hi All, I have a machine that has a simatic hmi. At present there is three level anonomous logon. I would like to change that so that a domain controller can control access to that hmi. Can anyone give me an outline of the steps I need to go through to create this control I have a user list with the levels of access. I have a domain controller and someone else only requires the list to set that part up. What do ineed to do to integrate my simatic hmi so that the domain controller can regulate access.? Br, David
davidnovo Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

9/4/2014 9:54 AM	Rate (0)
not_my_fault Bronze Member Joined: 6/13/2006 Last visit: 9/17/2024 Posts: 123 Rating: (28)	Hi davidnovo, maybe "SIMATIC Logon"is what you are looking for: 1st Link 2nd Link (see chapter 10.7.4.3) Regards, not_my_fault

Suggestion To thank Quote Answer

9/8/2014 12:06 PM	Rate (0)
davidnovo Posts: 13 Rating: (0)	Hi not_my_fault Thanks for the help :)
davidnovo Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Installation Options General

Follow us on