Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

using HSC in s7-1200

Created by: samuelraja at: 12/28/2013 2:46 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

12/28/2013 2:46 PM	Rate (0)
samuelraja Posts: 3 Rating: (0)	I am newer to the s7-1200 plc.i try to use HSC but i am feel to reset the HSC. please help me.
samuelraja Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

12/29/2013 9:02 AM	Rate (0)
Poljachina Posts: 62 Rating: (0)	Hello You can control the HSC with the CTRL_HSC block. You can find this block in the technology tab of all the instructions. You reset the current count value of the HSC like so: First set the NewCV input to 0. Then set the CV bit to ''1'' (TRUE). Now the HSC value should be 0. Then reset the CV bit so that the CV will count when you need it to. Hope this helps. Cheers. A
Poljachina Posts: 62 Rating: (0)
Suggestion To thank Quote Answer

1/2/2014 11:54 AM	Rate (0)
samuelraja Posts: 3 Rating: (0)	Thank you very much sir... i try it.. i get the count value.if you give the program means it will help me more.. THANK YOU.
samuelraja Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

1/11/2014 6:54 AM	Rate (0)
Josh Elliott Posts: 204 Rating: (29)	Hello If u cant get it,download the archived program in the attachment and check it out Attachment hsc.jpg (658 Downloads)
Josh Elliott Posts: 204 Rating: (29)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on