Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Using Marshaling Card TB1 with Modules ( DI - 6ES7321-1CH00-0AA0 ) & ( DO- 6ES7322-5GH00-0AB0 )

Created by: Walid Elshazly at: 10/30/2014 1:36 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

10/30/2014 1:36 PM	Rate (0)
Walid Elshazly Posts: 100 Rating: (0)	Hi Eevery body , I am planning to use Below Hardware setup : - Digital Input Module :6ES7321-1CH00-0AA0 which is " 16DI, 24V-48V UC; SEP. GROUPINGS " - Front Connector :6ES7921-3AB00-0AA0 - Connecting Cable :6ES7923-0BF00-0CB0 - Terminal Block TB1 :6ES7924-0AA10-0BA0 This configuration can't be done On TIA selection tool and it's mention only for this DI Module other types of front connectors ! And also this DI module is ech channel Fully isloated . Since the Terminal Block TB1 has only One wire for each channel (0-7) how the 0V looping is done ? Is those Terminal Block TB-1 Can work with this Fully isloated Module ? or not ? Thanks
Walid Elshazly Posts: 100 Rating: (0)	Last edited by: Walid Elshazly at: 10/30/2014 1:37 PM
Suggestion To thank Quote Answer

10/31/2014 12:05 PM	Rate (0)
allmächt! Posts: 215 Rating: (6)	Hi, did you refer toproduct information and manual? plslook for wiring and block diagram. Regards
allmächt! Posts: 215 Rating: (6)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on