Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Using Node-Red v3.x

Created by: MarkusWesso at: 8/9/2023 9:06 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

8/9/2023 9:06 AM	Rate (0)
MarkusWesso Member Joined: 6/20/2022 Last visit: 6/19/2024 Posts: 2 Rating: (0)	Hello everyone, is it possible to work with Node-Red v3.x? Right now i have the example Image 1.2.2. installed. What are the prerequisites? Thank you
	Last edited by: MarkusWesso at: 08/09/2023 09:09:11
Suggestion To thank Quote Answer

8/9/2023 11:24 AM	Rate (0)
bergmanu Platinum Member Joined: 4/28/2015 Last visit: 11/12/2024 Posts: 3345 Rating: (382)	Hi, are you talking about the IOT2050? If yes you wrote in the wrong Forum section.. But this is not a problem, I can move it. Best regards!
	Not working for IOT2050 support anymore from March 1st, 2024. I really enjoyed the time supporting you! :)
Suggestion To thank Quote Answer

8/9/2023 11:27 AM	Rate (0)
MarkusWesso Member Joined: 6/20/2022 Last visit: 6/19/2024 Posts: 2 Rating: (0)	Sorry yes, I m talking about the 2050

Suggestion To thank Quote Answer

8/15/2023 1:57 PM	Rate (0)
apastore Regular Member Joined: 10/22/2020 Last visit: 10/1/2024 Posts: 169 Rating: (6)	Hello MarkusWesso, please have a look here. apastore Hello Guru, unfortunately we are still working on an official update of nodejs and therefore all tools based on it have to suffer. In order to be able to use NodeRED 3.X anyway, we recommend that you launch a container with it. Docker is already pre-installed and anofficial container imageof the OpenJS Foundation can be used.Here'sa guide for doing so. Only the GPIO nodes cannot be used there without further ado. Please let us know if this workaround is an option for you. BR BR

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SIMATIC IOT2000 Software

Follow us on