Navigation

steps configuration

Created by: Noew Herp at: 4/7/2010 1:17 PM (1 Replies)

4/7/2010 1:17 PM	Rate (0)
Noew Herp Posts: 6 Rating: (0)	Hello Guys, I'm new to the forum and I'm hoping to get lots of information and sharing mine... I'm working with PCS7 7.1 and I'm confused about (maybe) a simple fact: I have one PC wich I connect to a S7400 and I don't know exactly how to configure this... In the manuals it is not very clear as they are talking about a ES and OS (two or more PC's). The following I did already: 1. Add PC station 2. Added a "Wincc application" -> for single project only? I would like to know the additional settings to configure my PC as ES/OS. I want to control the process from only one PC. For example: Do I need to configure the "Path to the OS target computer" and in my winccproj folder there are now four names: - OS(10) - OS(11) - OS(13) - OSC (3) - SCADA_ES I think this were OSfrom my "testing time". could I just remove them? In Component view, only my PC exists with the OS: SCADA_ES Hope someone can clear this up for me.... Thank you, best regards, Noew
Noew Herp Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

4/7/2010 2:03 PM	Rate (0)
Ammy Platinum Member Joined: 4/19/2008 Last visit: 11/21/2024 Posts: 1525 Rating: (159)	Noew Herp Hello Guys, I'm new to the forum and I'm hoping to get lots of information and sharing mine... I'm working with PCS7 7.1 and I'm confused about (maybe) a simple fact: I have one PC wich I connect to a S7400 and I don't know exactly how to configure this... In the manuals it is not very clear as they are talking about a ES and OS (two or more PC's). The following I did already: 1. Add PC station 2. Added a "Wincc application" -> for single project only? I would like to know the additional settings to configure my PC as ES/OS. I want to control the process from only one PC. For example: Do I need to configure the "Path to the OS target computer" and in my winccproj folder there are now four names: - OS(10) - OS(11) - OS(13) - OSC (3) - SCADA_ES I think this were OSfrom my "testing time". could I just remove them? In Component view, only my PC exists with the OS: SCADA_ES Hope someone can clear this up for me.... Thank you, best regards, Noew Hi Noew Herp, Please Find the Manual For The Minimal Configurations PCS 7 For OS Configuration
	Ammy New for every one.............. “No duty is more urgent than that of returning thanks.” If Problem Solved......! I can't help you privately - please post in the Forums
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users gbs